KN Rubber-Steel gasket 9107/KN
Back to overview

KN Rubber-Steel gasket
9107/KN

Request product
KN Rubber-Steel gasket 9107/KN
KN Rubber-Steel gasket 9107/KN
Request product

KN Rubber-Steel gasket
9107/KN

PDF data sheet

Features

The KN rubber-steel gasket 9107/KN consists of a metal support ring and a speciallymolded, replaceable elastomer ring which is located in the force shunt after fitting. The support ring also acts as a centering ring and force limiter. It thus both absorbs the bolt forces needed for high pressures and protects the rubber seal against overcompression.

Advantages

  • Uniform distribution of the surface pressure

Operating range

Pressure: p = 64 bar
Temperature

  • Continuous operation:
    t = –30 °C ... +120 °C
  • a few hours:
    t = –30 °C ... +150 °C
  • a few minutes:
    t = –30 °C ... +200 °C

Recommended surface roughness:
RZ ≤ 100 µm

Load values (q) elastomer seal
The surface pressure acting in the flange block position is:

  • at room temperature:
    qmax. = approx. 10 MPa
  • at 100 °C:
    qmax. = approx. 6 MPa

Materials

  • Sealing ring: EPDM
  • Support ring: St 37 galvanized, chromated or stainless steel

Recommended applications

Industries

  • Power plant technology
  • Water and waste water technology

  • Building services engineering

  • Flange connections

  • Pipe connections

Notes

With coated flanges, we recommend selecting the outer diameter of the coating so that the sealing lip on the atmospheric side lies in the steel part. If necessary, discuss the dimensions with your EagleBurgmann contact.

Forms of supply

  • Standard dimensions as defined in the EagleBurgmann in-house standard for DIN flanges or for flanges to ANSI B16.5 and MSS SP-4.4

Similar products

Buralloy Heat exchanger seal 2500

Buralloy
Heat exchanger seal 2500

The Buralloy heat exchanger seal 2500 is a semi-metal gasket with a soft core and metal jacketing. The Buralloy 2500 thus combines the benefits of a compressible soft seal with the mechanical strength of a metal seal. As a result, it can be produced in many different material combinations and in different styles to suit the application.
Buralloy Ring Type Joint 2961

Buralloy
Ring Type Joint 2961

Buralloy ring-type joint 2961 (RTJ) gaskets are manufactured from metallic materials in compliance with American standard ASME B 16.20 and the API specification. Detailed monitoring of every manufacturing step guarantees that the sealing rings offer the necessary surface hardness. This creates a functional seal without damage to the flanges. This gasket type is used successfully in downstream refinery applications, for example. RTJ gaskets are also commonly used in high-pressure valves and the associated pipe connections and in pressure vessel joints.
Buralloy Ring Type Joint 2961

Buralloy
Ring Type Joint 2961

Buralloy ring-type joint 2961 (RTJ) gaskets are manufactured from metallic materials in compliance with American standard ASME B 16.20 and the API specification. Detailed monitoring of every manufacturing step guarantees that the sealing rings offer the necessary surface hardness. This creates a functional seal without damage to the flanges. This gasket type is used successfully in downstream refinery applications, for example. RTJ gaskets are also commonly used in high-pressure valves and the associated pipe connections and in pressure vessel joints.
Back to overview