Thermoflon TR 6232
Back to overview

Thermoflon TR 6232

Request product
Thermoflon TR 6232
Thermoflon TR 6232
Request product

Thermoflon TR 6232

PDF data sheet

Features

Thermoflon TR 6232 is a PTFE packing made from high purity graphite-incorporated PTFE without the addition of lubricants or fillers. It is ideal as a header ring to prevent gap extrusion. The special yarn structure also makes it suitable for temperature cycling applications.

Advantages

  • High thermal conductivity
  • No embrittlement
  • Does not age
  • Good volumetric stability
  • Good structural strength
  • Outstanding cross-sectional stability
  • Gentle on spindle surfaces

Operating range

Valves
Pressure: p = 500 bar
Sliding velocity: vg = 2 m/s
Plunger Pumps
Pressure: p = 800 bar
Sliding velocity: vg = 2 m/s
Mixers, agitators, kneaders
Pressure: p = 25 bar
Sliding velocity: vg = 2 m/s

Temperature

  • Continuous operation:
    t = -200 °C … +280 °C

Chemical resistance:
pH = 0 ... 14
Universal chemical resistance. Also suitable for food applications. Not suitable for use in hot steam or abrasive media.

Standards and approvals

  • FDA
  • BAM (upon request)
  • EPA provisions, article 3, 1935/2004

Recommended applications

Industries

  • Food industry
  • Chemical industry

Mechanical units

  • Reciprocating piston pumps
  • Mixer
  • Agitators
  • Kneaders

Components

  • High pressure valves

Forms of supply

  • Sold by length, blank cuts, precompressed rings with straight or slanted cut
  • Box contents
    up to 6,35 mm: 1 kg
    7 - 10 mm: 2 kg
    11 - 13 mm: 3 kg
    14 - 24 mm: 5 kg
    from 25 mm: 10 kg

Similar products

BuraTAL-Flex 6070

BuraTAL-Flex 6070

BuraTAL-Flex 6070 is a graphite-based, multi-layered high performance packing It is manufactured from high-purity expanded graphite yarn (>98 %) combined with a newly-developed high temperature impregnation. For long-term stable use in the high temperature range, the packing is additionally finished with a corrosion inhibitor. The multi-layer structure combines the benefits of maximum possible gap bridging due to the inner Inconel wire reinforcement with protection of the high-quality spindle surfaces in the valves. The packing can be installed without special end rings.
BuraTAL-Flex 6224

BuraTAL-Flex 6224

BuraTAL-flex 6224 is a diagonal braided packing made from a combination of Aramid and PTFE yarns with special impregnation. 6224 is the preferred choice for valves, especially low emission applications.
BuraTAL-Flex 6250

BuraTAL-Flex 6250

BuraTAL-Flex 6250 is a concentrically braided packing with a dense PTFE yarn sleeve and a carbon yarn core. In addition it contains a special impregnation. 6250 is the preferred choice for fugitive emission, applications and for on/off and control valves.
Back to overview