Show all references

Saving the day

Pusher seal H75VN with DiamondFace for a pump in a cooling process

Eine erhöhte Ansicht einer großen, komplexen Industrieanlage für chemische Produkte oder einer Ölraffinerie mit zahlreichen Metallrohren, Lagertanks und Destillationskolonnen vor dem Hintergrund eines Sonnenuntergangs.

Situation

Poor lubricating properties of the coolant and contaminating particles

Challenge

Retrofitting a seal that was intended for a different application

Solution

O-ring seal H75VN with DiamondFace from EagleBurgmann

Magnetic coupling pump in a refrigeration unit

An elevated view of a large, complex industrial chemical or oil refinery plant with numerous metal pipes, storage tanks, and distillation columns against a sunset sky.

At one of its several manufacturing plants in the Middle East, a chemical company produces Toluene Diisocyanate (TDI). This chemical is a crude material used for the production of polyurethanes, which in turn is used for flexible foam applications like furniture or carpet underlays or packagings, as well as for coatings, sealants, adhesives or elastomers etc.

For the purifying process, this fluid is dissolved in a suitable organic solvent and then cooled to a temperature so that portions of the isocyanate crystalize. The crystallites are separated from the mother liquor, where a portion of the mother liquor is recycled to a crude isocyanate stream while the remaining portion is purged from the system. The crystals are then dissolved again in a mixture of fresh solvent and mother liquor recycled from a subsequent stage, depending on the requirement. The temperature of each crystallization stage is higher than in the previous crystallization. TDI must therefore be cooled.

Cooling of TDI

A cutaway view of a mechanical seal or gland made of clear acrylic, revealing the internal components like springs, metal faces, and rubber O-rings.

The chemical company operates a mechanical refrigeration unit (MRU) with a magnetic coupling pump. R134A-Freon serves as refrigerant, as it is completely compatible to the production of TDI as well as being non-ozone depleting. It is widely used, but because of its poor lubrication properties it is a very challenging fluid for the seals at the pump shaft.

Two weeks after commissioning the magnetic coupling failed. A quick solution was needed. It was therefore decided to remove the pump from the system and replace it with a stand-by-pump equipped with the pusher seal H75VN from EagleBurgmann. However, the stand-by-pump was not originally equipped for such a cooling process, which is why the seals also failed in less than three weeks.

Extremely wear-resistant: DiamondFace

A large, brilliant-cut diamond on a blue surface, illuminated by a spotlight which highlights its facets and casts a bright shadow.

The technicians of the chemical company contacted EagleBurgmann and requested a solution. Since the delivery of the dry gas seal DGS6 with DiamondFace, the standard recommendation for processes with R134A-Freon, would have taken too long, EagleBurgmann suggested to change the seal face and seat of the H75VN and replace it with DiamondFace seal faces. This special technology provides the surfaces of the seal faces with a microcrystalline coating of artificially produced diamond, making them extremely wear-resistant and capable of partial dry running. DiamondFace reduces heating of the seal and carbonization effects due to contaminating particles.

After operating for 18 months without interruptions, the seal was inspected and its good condition impressed the customer very much. The EagleBurgmann solution now plays a role model with the result that several other pumps were retrofitted, including some pumps in other processes where seals were affected, for example, by barrier fluids like monochlorobenzene with very poor lubricating and high oxidizing characteristics.

Operating conditions

Shaft diameter: d1 = 90 mm (3.543”)
Pressure: p1 = 12.4 barg (179.8 PSIG)
Temperature: t = 45 °C (113 °F)
Sliding velocity: vg = 6.5 m/s (21.3 ft/s)

Refinery pump - maximum leak tightness

When media with hydrocarbons are pumped, seals in pumps can be exposed to high temperatures and wear caused by solids. The safety standards are high to protect the environment and personnel from leaking media. EagleBurgmann developed a robust solution with reliable safety properties for a refinery.

Read the complete case study

10 years of reliability: Protecting the heart of Great Britain’s natural gas infrastructure from failure

In Great Britain, a shortage in natural gas supply has severe consequences: Since the country switched from coal-fired to gas-fired power stations, a gas supply shortage makes households and industrial consumers not only vulnerable to failing heating and gas stoves, but also to power outages. Companies along the value and transportation chain of natural gas are therefore especially dependent on reliable equipment.