DiamondFace-coated sliding faces in boiler feed pumps

DF-SAF(P)I seals as a solution against electrical corrosion

KeyVisual_CaseStudy_DF-SAF-P-I.jpg
Situation

Boiler feed pump in a nuclear power station in southern Germany

Challenge

Complicated repair jobs and expensive downtimes due to destructive electrical corrision

Solution

EagleBurgmann mechanical seals DF-SAF(P)I with DiamondFace

KKW Isar 1_K0525089.JPG

Ever since October 2010, the world‘s first mechanical seal with diamond-coated sliding faces has been operating in a boiler feed pump at a nuclear power station in southern Germany, to the complete satisfaction of the operator, E.ON. EagleBurgmann is the first and only company to offer this convincing technological solution which has currently been used in the SAF(P)I seal type.

PPT-040-2012_EON Isar.png

Illustr.: Boiler feed pump at the power station operator E.ON, equipped with EagleBurgmann DF-SAFI.

The outstanding advantage of the DF-SAF(P)I is that it puts an end to the electrical corrosion that has a destructive effect on the silicon carbide rings. Even without conditioning the feed water, e.g. by injecting ammonia, the seal with coated seal face and seat achieves a significantly longer service life. Complicated repair jobs and expensive downtimes are both minimized as a result.

Tested under scientific conditions, proven in practical applications

Before the DiamondFace coating was used, it was tested under scientific conditions and with the original fluid as part of a project undertaken jointly by EagleBurgmann and the Technical University of Graz in Austria. After more than 10,000 hours of continuous operation without any signs of electrical corrosion on seal face or seat, it was then possible to go on to successful practical application of the seal solution together with E.ON.

DF-SAF5_006b.tiff CaseStudy_Grafik_SAF_Germany.jpg

Illustr. 1: Mechanical seal type DF-SAF
Illustr. 2: Yellow parts = rotating, blue = stationary, gray = housing

Features

  • Cartridge design
  • Single seal
  • Balanced
  • Independent of direction of rotation
  • Integrated pumping device
  • Double pressure balanced
  • Stationary springs
  • Seal face and seat with DiamondFace coating

Advantages

  • Seal resistant to deformation, for very high sliding velocities and pressures
  • Specifically developed for use with water that has a high electrical conductivity in conjunction with high sliding velocities
  • Resistant to electrical corrosion
  • Economy due to standardized internal components
  • High flexibility due to adaptation of the connecting parts to the pump installation space
  • Optimum heat dissipation due to integrated pumping device
  • Lower power consumption than conventional seals
  • Non sensitive to shaft movements due to stationary design
  • Quick and easy installation because it is a preassembled unit
  • Only a few seal components

The operator‘s expectations were met in full, and as a result he ordered additional DiamondFace seals for re-equipping another pump. In the meantime, orders for power stations operated by other customers in the USA, South Korea and Switzerland had been placed and completed. Reports on the experience at EagleBurgmann's reference customer, E.ON, were one of the decisive factors leading to these decisions.

Reliable partnership

EagleBurgmann has been working successfully and in a spirit of partnership with E.ON for more than 20.years, to the mutual benefit of both partners. This confirms that EagleBurgmann's success is determined not only by innovative technology but also by the commitment and customer orientation displayed by its employees.

  • Shaft diameter: d1 = 120 ... 200 mm (4.72" ... 7.87")
  • Pressure: p1 = 70 bar (1,015 PSI)
  • Temperature: t = 300 °C (572 °F)
  • Sliding speed: vg = 70 m/s (230 ft/s)
  • Axial movement: +/- 3 mm
     
  • Seal face and seat: Silicon carbide with diamond coating (DiamondFace)
  • Secondary seals: EPDM (E), FFKM (K)
  • Springs: CrNiMo steel (G)
  • Metal parts: CrNiMo steel (G)

 

Contact us

Inquiry

for more information

Show locations

DiamondFace-coated sliding faces in boiler feed pumps

Download the solution flyer

PDF download - 467.2 KB

Mechanical seals DF-SA

Download the brochure

PDF download - 1.5 MB

More about the DF-SA

Learn more about our diamond-coated high-performance DF-SA seal

Further reference projects

KeyVisual_CaseStudy_Hengli.jpg
China, Mainland

10 years ahead

Between June 2017 and March 2019 the Hengli Group constructed an integrated refining and chemical complex in the Chinese harbor town Dalian where 20 million tons of crude oil are processed every year. EagleBurgmann advised the company Hengli concerning the selection of mechanical seals and supply systems for the whole plant and supplied more than 95 % of the components in use. 

Read the complete case study
KeyVisual_CaseStudy_National Grid
United Kingdom

10 years of reliability: Protecting the heart of Great Britain’s natural gas infrastructure from failure

In Great Britain, a shortage in natural gas supply has severe consequences: Since the country switched from coal-fired to gas-fired power stations, a gas supply shortage makes households and industrial consumers not only vulnerable to failing heating and gas stoves, but also to power outages. Companies along the value and transportation chain of natural gas are therefore especially dependent on reliable equipment.

Read the complete case study
Feuer und Flamme_DRO_Head3
Germany

100 percent performance at 300 degrees

Things get hot in rotary kilns, very hot in fact. In the production of cement, for example, the thermometer measures more than 1,000 degrees Celsius. Sealing systems from EagleBurgmann, a company of the Freudenberg Group and EKK, make sustainable contributions to environmental protection, energy efficiency and process reliability under these "fiery" high-temperature conditions.

Read the complete case study
KeyVisual_CaseStudy_RamcoCement.jpg
India

A Partnership to build on

Our modern civilization is quite literally built upon cement. Today, building materials made from cement are used in buildings, roads, bridges, dams etc. Cement production is a heat-intensive process and causes thermal expansion in duct systems. To compensate this, Indian cement producer Ramco Cement needed fabric expansion joints with a diameter of several meters for two of their plants. On the basis of a close collaboration, EagleBurgmann was able to design components that increase the efficiency of the plant in the long run.

Read the complete case study
KeyVisual_RoTechBooster_Dock_Sud
Argentina

Clean gas despite fluctuating operating conditions

Frequent starts and stops are a severe test for gas-lubricated compressor seals. Installed in an Argentinean combined cycle power plant is an EagleBurgmann supply system that provides a continuous gas flow rate for the seals and adapts it to changing conditions. Since then, the operational reliability of the compressors has increased significantly.

Read on for the entire case study
KeyVisual_CaseStudy_AGSR_Schaufeltrockner.jpg
Germany

Clean sealing solution for demanding crystal production

Seals are a risk factor in the production of liquid crystals. If there is even the slightest contamination of the liquid crystals, this will later affect the image quality of the display. Read on to see which sealing solution Merck KGaA uses in paddle dryers for the production of liquid crystals.

Read on for the entire case study
Show all references
Newsletter

Excellence in Practice

With our free e-mail newsletter „Excellence in Practice“, you will receive first-hand information about current products, services, references and worthwhile industry insights.