Quick-Seal Multi 9654/MB

Quick-Seal Multi 9654/MB For a larger view, please mouseover the image.
Quick-Seal Multi 9654/MB is a sealant tape of 100% pure, virgin PTFE with self-adhesive on the rear face. The special manufacturing technique results in a multidirectional fibrillised structure (ePTFE), which demonstrates extraordinary properties.
  • High dimensional stability
  • High residual stress
  • Excellent adaptability
  • Minimized cold-flow and creep behaviour
  • Very good chemical resistance
  • Easy handling
  • Ideal for extreme requirements
Pressure: p = Pressure resistance depends only on installation and operating conditions. Please check our installation and maintenance instructions.
Temperature: t = -240 °C ... +270 °C
short term up to +315 °C
Chemical resistance: pH = 0 … 14

Resistant to all media, except diluted and molten alkali metals as well as elementary fluorine at temperatures t > 150 °C and pressures p > 40 bar.

  • TA-Luft
  • FDA 21 CFR 177.1550
  • Physiologically harmless over long term temperature use up to +260 °C, according BG Nr. 21
  • In accordance with EN 1514-1 for thickness 2.0 mm
  • Qmin(0.01): 25 MPa according EN 13555 for 40 bar, QSmax: 180 MPa
  • Blow-out safety accord. VDI 2200 class C
  • KWO
  • EN 1935/2004
  • Process industry
  • Petrochemical industry
  • Chemical industry
  • Pharmaceutical industry
  • Pulp and paper industry
  • Food and beverage industry
  • Sugar industry
  • Heat exchangers
  • Covers
  • Hatches
  • Reactor vessels
  • Process vessels
  • Maintenance seals
Easy installation on-site including cutting to length or adjustment by hand. Severe uneveness can be levelled by layering and/or shimming. No holding time, no cure time required.
No aging of the sealing tape. The adhesion depends on storage- and installation conditions.
Width: 10 … 65 mm
Thicknesses: 2.0 /3.0 /6.0 /9.0 mm
Supplied in rolls