EagleBurgmann international
Ireland
UK
Ireland
UK
Ireland
UK
Ireland
UK
Ireland
UK
Ireland
UK
EagleBurgmann WORLDWIDE
With around 250 locations and 90 serve centers, we are represented in the most important economic regions of the world. The advantages are clear: short paths to our customers, fast response times and a shared language.
AGSR3(L)-D
Double seal (with floating bearing for the shaft) for sterile applications. The specific design free of dead spaces with polished surfaces on the product side meets the requirements for hygienic applications.
Double seal (with floating bearing for the shaft) for sterile applications. The specific design free of dead spaces with polished surfaces on the product side meets the requirements for hygienic applications.
| Item | Description |
| 1, 15 | Seal face |
| 6 | Sealing ring |
| 7, 9 | Seat |
| 8, 10, 16 | O-Ring |
AGSR
Features
- For top and side entry drives
- Double seal
- Balanced
- Stationary springs on product side
- Independent of direction of rotation
- Gas-lubricated
- Cartridge unit
Advantages
- Ready-to-fit and factory-tested unit
- Rotating seat at product side
- Torque transmission by clamping ring for large axial movements
- Non-contacting operation
- No friction on the seal faces, no heat generated at the seal or in the medium
- Sterile design available
- ATEX certification on request
Operating range
Shaft diameter:
d1 = 20 ... 200 mm (0.8" … 7.9")
Pressure:
p1 = Vakuum ... 6 bar (87 PSI),
Δp = min. 3 bar (44 PSI),
p3 = max. 9 bar (131 PSI)
Temperature:
t1 = -20 °C ... +200 °C
(-4 °F … +392 °F)
Sliding velocity: vg = 0 ... 5 m/s (0 ... 16 ft/s)*
* Higher velocities on request
! It should be noted that the extremal values of each operating parameter cannot be applied at the same time because of their interaction.
d1 = 20 ... 200 mm (0.8" … 7.9")
Pressure:
p1 = Vakuum ... 6 bar (87 PSI),
Δp = min. 3 bar (44 PSI),
p3 = max. 9 bar (131 PSI)
Temperature:
t1 = -20 °C ... +200 °C
(-4 °F … +392 °F)
Sliding velocity: vg = 0 ... 5 m/s (0 ... 16 ft/s)*
* Higher velocities on request
! It should be noted that the extremal values of each operating parameter cannot be applied at the same time because of their interaction.
Materials
Seal faces and seats: Silicon carbide, FDA conform
Secondary seals and metallic parts acc. to application and customers' requirement.
Secondary seals and metallic parts acc. to application and customers' requirement.
Standards and approvals
- FDA
- ATEX
- Compliant to TA Luft (German Clean Air Act)
Recommended applications
- Chemical industry
- Food and beverage industry
- Pharmaceutical industry
- Mixers
- Dryers
- Special rotating equipment
Notes
Options:
- Flush
Recommended piping plans
Gas supply by EagleBurgmann
GSS4015/A400-D0,
GSS4016/A250-D1 or GSS4016/A350-D1.
Note: To assure a sufficient supply of the mechanical seal, pressure at entry of the supply system must be min. 3 bar (44 PSI) above max. barrier pressure always.
Product link:
EagleBurgmann GSS
GSS4015/A400-D0,
GSS4016/A250-D1 or GSS4016/A350-D1.
Note: To assure a sufficient supply of the mechanical seal, pressure at entry of the supply system must be min. 3 bar (44 PSI) above max. barrier pressure always.
Product link:
EagleBurgmann GSS
Product variants
AGSR5(L)-D
Double seal (with floating bearing for the shaft). If the seal has to run in the product, please inquire.
Double seal (with floating bearing for the shaft). If the seal has to run in the product, please inquire.
AGSR5(L)-D
Double seal (with floating bearing for the shaft).
Double seal (with floating bearing for the shaft).
Similar products
AGSZ
- For top entry drives
- Double seal
- Balanced
- Independent of direction of rotation
- Gas-lubricated
- Cartridge unit
Contact
Inquire about individual solutions
We develop and produce customer-specific special and individual solutions for every application.