Compression packings / Gaskets

Araflon 6426 Araflon 6426 Araflon 6426 is a diagonally braided packing of high quality smooth synthetic, partly pre-impregnated endless aramid fibres (Kevlar) with multiple PTFE impregnation and lubricant. Furthermore Araflon 6426 offers a great quality and high strength and is therefore a packing for all industry branches, especially chemical and petrochemical industry, wastewater, paper and pulp.
Burachem Blue 9655/B Burachem Blue 9655/B Burachem Blue 9655/B gasket sheet is a PTFE-based sealing material, filled with hollow micro glass beads. The gasket sheet provides a seal even with low surface pressures and when there are only low bolt forces available.
Burachem Brown 9655/R Burachem Brown 9655/R Burachem Brown 9655/R is a PTFE-based sealing material, filled with silica. Compared to conventional PTFE, this gasket material is suitable for considerably higher pressure and temperature applications. Ideal for standardisation because of the chemical and mechanical characteristics.
Burachem MMH 9654/MMH Burachem MMH 9654/MMH Burachem MMH 9654/MMH safety-gasket rings are made from multidirectional expanded PTFE are manufactured to meet the requirements of endusers for safety, tightness and reliability. This gasket is especially designed for use as handholes, headholes, manholes and all kind of inspection ports in vessels and boilers. According to Germany’s law an approval according TRD 401 /VdTÜVInstruction “Seal 100” is available. These gaskets have high adaptability and operating safety meeting test category “D”.
Burachem Multi 9654/MP Burachem Multi 9654/MP Burachem Multi 9654/MP is an ePTFE sheet material made from 100% virgin PTFE. Because of a special manufacturing technique the resulting material has a multidirectional fibrillised structure (ePTFE), which provides exceptional properties. This material shows almost no increase in width and simultaneously very low compressive creep even under extreme conditions.
Burachem VP 9655 Burachem VP 9655 Burachem VP 9655 is a sheet material made from 100 % pure PTFE without added reinforcement or fillers.
Burachem White 9655/W Burachem White 9655/W Burachem White 9655/W is a PTFE-based gasket material, with barium sulphate filler. It is a cold-flow reduced PTFE based gasket sheet with high mechanical strength and chemical resistance as well as optimized creep resistance. Burachem White 9655/W is the ideal gasket solution for equipment where higher bolt loads are required.
Buraflex HT 2000/HT Buraflex HT 2000/HT EagleBurgmann Buraflex HT 2000/HT is made from diagonally braided permanently elastic graphite foil with a high performance lubricant. Therefore it is the pump packing for high temperatures and very high sliding speeds. The combination of graphite body yarn and Nomex yarn corners provide high long-term strength and resistance to corner extrusion.
Buraflon 5846 Buraflon 5846 Buraflon 5846 is a ramie fibre packing, diagonally braided, with light-coloured special PTFE-impregnation to avoid product contamination, based on paraffin wax and oil (silicon oil free). Therefore it is particularly resistant against degradation of fibers through salt water attack. Buraflon 5846 is a suitable solution for marine applications and applications in the brewing and beverage industry as well as in the pharmaceutical industry.
BuraGlas 9480 BuraGlas 9480 BuraGlas 9480 is a high grade diagonal braided glass-fibre packing, made of texturized glass yarn. BuraGlas 9480 is a rectangular packing. This packing solution is suitable for sealing of vessels, coal mills, industrial heaters, oven doors, hatches and covers as well as for thermal isolation of pipe flanges, pipe bushings etc.
BuraGlas GS tape 9495 BuraGlas GS tape 9495 Woven glass fibre sealant tape made of glass layers with reinforced, stitched edges. The different layers are stitched and glued together.
If needed the tape can be impregnated with a high-temperature resistant graphite compound.
BuraGlas HT 9483/HT BuraGlas HT 9483/HT BuraGlas HT 9483/HT is a high temperature glass fiber square braided packing for sealing of vessels, coal mills, heaters, oven doors. Its core is made of HT glass fiber yarn with Inconel® wire reinforcement. The packing is additionally impregnated with special high temperature dispersion. Suitable for temperatures up to 800 °C.
BuraGlas HT-SI 9486 BuraGlas HT-SI 9486 BuraGlas HT-SI 9486 is made from high quality silicic acid yarn capable of withstanding extremely high temperatures. The silicid acid fibers are diagonally braided and impregnated. This is augmented by a special impregnation which gives optimal density resulting in excellent sealing characteristics. This compound is excellent for static applications in boilers, furnaces or heat exchangers. Also for thermal insulation.
BuraGlas INC 7260/INC BuraGlas INC 7260/INC BuraGlas INC 7260/INC is a square braided packing of HT glass-fiber yarn with Inconel reinforcement and special mica impregnation. Suitable for temperatures up to 750 °C. Special packing for sealing of vessels, coal mills, heaters, oven doors.
BuraGlas R 9472 BuraGlas R 9472 BuraGlas R 9472 is a round braided packing made of high grade texturised glass-fiber yarns. This packing solution is suitable for static sealing in vessels, ovens and oven doors. BuraGlas R 9472 is developed for thermal insulation of pipe flanges.
Burajet 8032/HHP  Injection Device Burajet 8032/HHP
Injection Device
Hydraulic injection device for easy injection of fibre compound into stuffing box. The change to an injectable fibre system is easy and without great technical demands.
Burajet  SCW 8032/SCW Burajet
SCW 8032/SCW
Burajet SCW 8032/SCW is a PTFE fiber injectable compound with excellent lubrication properties provided by PTFE-based additives. Depending on the application a special retention can be necessary. A special retention of two braided packing rings (e.g. Burasoft 6225/L or Buramex SF 6335) or two lipped rings (HPU-hydrolyse resistant polyurthane or FKM-fluorocarbon rubber) can be installed.
Burajet Chamber rings 8032/AU Burajet Chamber rings 8032/AU Burajet Chamber rings 8032/AU are profiled end rings with inner lip seal provide excellent retention of Burajet injectable fibre packings 8032/SCW, 8032/SCB, 8032/SCH, and 8032/SCA. Burajet AU lip seals are made from high density Polyurethane, hydrolysis resistant. Burajet FKM lip seals are made from Fluoropolymer. The rings are manufactured to fit the shaft and gland housing diameters. An exact measurement is required (to 0.1 mm decimal place) in order to machine the chamber rings to the correct dimensions.
Burajet SCA 8032/SCA Burajet SCA 8032/SCA Burajet SCA 8032/SCA injectable compound is made from Aramid fiber with high-duty PTFE based lubricant. This composition should be installed with End rings, either braided packing e.g. Buramex SF 6335 or Araflon 6426, or with FKM or HPU profiled Lip seals (HPU - polyurethane which is resistant against hydrolysis, FKM - fluorocarbon rubber). It is quite economic because of due to the ability to re-inject packing during normal plant operation.
Burajet SCB 8032/SCB Burajet SCB 8032/SCB Burajet SCB 8032/SCB is a PTFE fiber injectable compound with a high duty graphite based lubricant. Depending on the application a special retention can be necessary. A special retention of two braided packing rings (e.g. Buraflex 2000/HT) or two lipped rings (HPU-hydrolyse resistant polyurethane or FKM-fluorocarbon rubber) can be installed.
Burajet SCH 8032/SCH Burajet SCH 8032/SCH Burajet SCH 8032/SCH is a graphite injectable compound with a paraffin oil-based lubricant. Depending on the application a special retention can be necessary. A special retention of two braided packing rings (e.g. Isartherm-Flex 6050 or Isartherm K-Flex 6051) can be installed. Developed especially for higher temperature valve applications.
Buralloy  Ring Type Joint 2961 Buralloy
Ring Type Joint 2961
Buralloy Ring Type Joints 2961 are manufactured according to ASME B16.20 standards and API specification 6A and 17B. Careful control of all manufacturing processes and sealing action through metal-to-metal contact ensure correct surface hardness to offer sealing without damaging flange connections. These metallic gaskets are also commonly used on extremely high pressure valves and pipe work assemblies, along with some high integrity pressure vessel joints. Buralloy Ring Type Joints 2961 are used in oil fields on drilling and completion equipment as well as in downstream refinery applications.
Buralloy  Heat exchanger seal 2500 Buralloy
Heat exchanger seal 2500
Buralloy Heat exchanger seal 2500 gaskets are manufactured using graphite, non-asbestos sheet and non-ceramic fiber as filler, which are then jacketed by various metals such as stainless steel, tin or copper. These gaskets are especially suitable for static sealing under high temperature, such as heat exchangers or pressure vessels.
Buramex SF 6335 Buramex SF 6335 Buramex SF 6335 is made from diagonally braided Nomex (100 % white, elastic synthetic fibers) white aramid-based yarn with a silicon-free lubricant. This is a universal, wear-resistant packing which is very useful to standardize whole branches of industry - including those with abrasive media. The packing is successfully applied in many industries, when a clean, economic and easy packing is required, like pulp and paper, sugar, breweries, waste water treatment, or water treatment in power plants, cooling water applications, abrasive river water and in turbine oil circuits.
Burasil Basic 9544/B Burasil Basic 9544/B Burasil Basic 9544/B is a synthetic sheet made of high-quality aramid fibres, fillers and NBR rubber (Nitrile Butadiene Rubber). The sheet is manufactured with anti-stick coating on one side. Furthermore Burasil Basic 9544/B is a standard gasket sheet with a balanced mixture of basic materials for flange and flange-like connections in common service pressure and temperature applications.
Burasil Universal 9544/U Burasil Universal 9544/U Burasil Universal 9544/U is an universal gasket sheet consisting of high quality aramid fibres, special fillers and NBR rubber (Nitrile Butadiene rubber). This gasket sheet is PTFE coated on both sides, for an easy removal. Burasil Universal 9544/U is suitable for thermally and mechanically highly stressed gasket connections.
Burasoft 6225/L Burasoft 6225/L Burasoft 6225/L is a diagonally braided PTFE packing with silicon oil-free lubrication. Packing for universal applications in chemical, pharmaceutical and food industry.
BuraTAL  HT 9650/HT BuraTAL
HT 9650/HT
BuraTAL HT 9650/HT is based on braided end rings of expanded pure graphite with reinforced corners of carbon fiber yarn. In addition, the packing set consists of packing rings of expanded pure graphite, with very high density to maintain cross-sectional tightness under load. The adapter rings of very dense, expanded pure graphite are especially impregnated and have a friction reducing coating.
BuraTAL HP 9650/HP BuraTAL HP 9650/HP BuraTAL HP 9650/HP is a new generation of sealing set from 6 sealing rings. The rings are constructed using non woven technology. The outer chamber rings are made from carbon fiber including stainless steel mesh reinforcement and impregnation. The next rings are made from aramid-PTFE non woven with stainless steel mesh reinforcement. Both central sealing rings are produced from aramid with PTFE impregnation. In particular applications a spindle bearing of carbon bushings might be required.
BuraTAL T3 9650/T3 BuraTAL T3 9650/T3 BuraTAL T3 9650/T3 is a high grade universal sealing set for valve stems. This sealing set is completely made from high grade impregnated non-woven material. Two end rings made of carbon fibre non-woven material are impregnated with a special PTFE/graphite mixture. The middle rings consist of aramid non-woven material with a PTFE impregnation giving high cross-sectional leakage tightness.
BuraTAL T4 9650/T4 BuraTAL T4 9650/T4 BuraTAL T4 9650/T4 is a universal sealing set for valve stems, which is completely made out of high-grade impregnated non-woven material. Two rings on the atmospheric side are made of carbon fibre non-woven material impregnated with a special PTFE/graphite mixture. The rings on the product side are white and consist of aramid non-woven material with a PTFE–impregnation with high cross-sectional density.
BuraTAL T5 9650/T5 BuraTAL T5 9650/T5 BuraTAL T5 9650/T5 new type of packing set, which is completely made out of high-grade impregnated non-woven material. The 4 or 5 ring sets are white and consist of aramid non-woven material with a PTFE impregnation with high cross-sectional stability.
BuraTAL-Flex 6070 BuraTAL-Flex 6070 BuraTAL-Flex 6070 is braided from high purity expanded graphite material (C-content >99 %) over knitted with Inconel wire. It contains a special high temperature impregnation as well as a corrosion inhibitor. Due to the high wire content it can be used without end rings.
Buratex B 4001 Buratex B 4001 Buratex B 4001 is a cotton packing with black grease impregnation. This packing is an ideal economical general purpose pump packing. Buratex B 4001 flexible cotton packings are manufactured from selected wear-resistant yarns which are pre-impregnated and twisted. A very intensive secondary impregnation combined with braided construction results in a very elastic and soft packing which is resistant to rot.
Buratex R 4002 Buratex R 4002 Buratex R 4002 is a red colored cotton packing with special impregnation. And therefore it is the ideal packing for sea water applications. Buratex R 4002 flexible cotton packings are manufactured from selected wear-resistant yarns which are pre-impregnated and twisted. During the production process a very intensive secondary impregnation combined with diagonal braided construction offers a very elastic and soft packing which is resistant to rot.
Buratex W 4003 Buratex W 4003 Buratex W 4003 is a cotton packing with light colored grease impregnation. Therfore this is an ideal economical general purpose pump packing for undiluted liquid media and clean applications. Buratex W 4003 flexible cotton packings are manufactured from selected wear-resistant yarns which are pre-impregnated and twisted. A very intensive secondary impregnation combined with diagonal braided construction offers a very elastic and soft packing which is resistant to rot.
Buratherm N 9544/N Buratherm N 9544/N Buratherm N 9544/N is a soft gasket material with the most up-to-date combination of graphite with reinforcement of para-aramid fibre and reduced fillers. Gasket sheet with highly effective anti-stick coating on both sides. Buratherm N 9544/N offers a much wider field of applications in comparison to other fibre-based materials with regard to mechanical performance under temperature and also in respect of chemical resistance due to the high content of graphite.
Chemstar L 6226/L Chemstar L 6226/L Chemstar L 6226/L is a 100% PTFE-packing impregnated with PTFE-dispersion. It is a sintered, high performance PTFE-multifilament-yarns with thorough PTFE-impregnation, diagonally braided. Universal PTFE packing, preferred for use in chemical and food industry.
Chemstar NQ 6226/NQ Chemstar NQ 6226/NQ Chemstar NQ 6226/NQ is diagonally braided from 100 % PTFE silk impregnated with pure PTFE dispersion. This low-chloride packing is nuclear quality for special service in power plant valves.
Corrachem  corrugated gasket 2897/T Corrachem
corrugated gasket 2897/T
Corrachem 2897/T is a high-grade three component seal out of flexible graphite, stainless steel and PTFE. The core of this gasket is a corrugated stainless steel profile ring, on both sides layers of expanded Statotherm graphite, with a PTFE-layer on both sides.
Corratherm  corrugated gasket 2897 Corratherm
corrugated gasket 2897
Corratherm corrugated gasket 2897 is a high-quality two-component gasket. Its core is made of a corrugated stainless steel profile ring with flexible Statotherm graphite foil on both sides. The gasket construction for an outside diameter up to 1,000 mm is made in one piece, larger dimensions have a welded profile ring.
Elastic Tankpak 6756 Elastic Tankpak 6756 The EagleBurgmann Elastic Tankpak 6756 consists of a core made from an elastic hollow tubular EPDM rubber and is wrapped by the first layer of PTFE foil. Thereby the chemical resistance of the gasket is significantly upgraded. The intermediate layer made from polypropylene yarn is mainly a kind of cushion. The entire seal is then over-braided with PTFE yarn.
Extruded PTFE/graphite packing 6655 Extruded PTFE/graphite packing 6655 Universal PTFE/graphite extruded packing (black). Excellent cross sectional density, self-lubricating, wear resistant but gentle to shaft, absorbs abrasive particles. Excellently suitable for abrasive media when additionally low gas leakage and low friction are required.
Fire Safe packing set 9650/FS Fire Safe packing set 9650/FS Fire Safe packing set 9650/FS is a high performance set designed for the most arduous service. This is a special packing solution for valve applications. It is made from a combination of expanded pure graphite and stainless steel components.
Gasket cutter 9614 Gasket cutter 9614 The gasket cutter consists of a base plate to cut on, a short and a long bar with a sliding cutting tool. The sealing material is fixed by the central bolt. The tools to punch the central hole are easy to handle. After fixing the sealing material on the base plate and adjusting the cutting diameter on the bar, the gasket is cut by rotating the cutting tool.
Gasket nibbler 9615 Gasket nibbler 9615 The complete equipment consists of an aluminium base plate, a nibbler with holding device, a parallel stop, a release key to change the cutting knives, a spare knife, two clamps, punching tool, a plate to punch on as well as a pair of scissors to cut sealing material (prepare smaller pieces from sheet material by hand).
Hot Water Packing 6026 Hot Water Packing 6026 This Hot Water packing is gentle to the shaft, particularly suitable for hot water, condensate and cooling water pumps. Universally applicable for high sliding velocities, and is additionally wear resistant.
Isartherm 6060 Isartherm 6060 EagleBurgmann Isartherm 6060 is a diagonal braided packing made from high purity carbon fibers. The fibers are combined with a silicon-free lubricant which has especially high speed/load running capabilities. Pre impregnated high performance yarns are combined with special lubricants during the braiding process to form a well balanced high quality packing. Therefore the Isartherm 6060 is the preferred choice for challenging applications especially in the pulp and paper industry.
Isartherm A 6011/A Isartherm A 6011/A Isartherm A 6011/A is a diagonally braided packing solution made of high temperature resistant, pure graphite fiber with heat resistant newly developed special impregnation. This packing is one of the most outstanding packing solutions for high pressure and high temperature duties, especially for valves and fans in power plant. Long and extensive field experience has proven the great reliability and safety of this compact and elastic packing.
Isartherm B 6011/B Isartherm B 6011/B Isartherm B valve packing for medium pressures and temperatures e.g. in sugar, textile and paper industries. High cross-sectional density and structural stability. Wear resistant and gentle to shaft at the same time.
Isartherm C 6011/C Isartherm C 6011/C Isartherm C 6011/C consists of a flexible graphite core with a specially designed wear resistant cover made from pure carbon fibre. The enclosing braid is flexible and heat resistant. Running against the spindle is optimised and installation is made easier through the high graphite content of the impregnation.This high performance valve packing is one of the most outstanding packing solutions used especially in energy production but also in every industry where high temperatures and aggressive media occur. Long and extensive field experience has proven the great reliability and safety of this packing.
Isartherm K-Flex 6051 Isartherm K-Flex 6051 Isartherm K-Flex 6051 is a braided packing made from expanded graphite, with reinforced corners made of carbon fiber, reinforced with textile fibers. This packing solution is an elsatic, extrusion resistant packing for applications with high-temperature/high-pressure. Particularly appropriate for power plants and chemical applications.
Isartherm-Flex 6050 Isartherm-Flex 6050 Isartherm-Flex 6050 is a diagonally braided packing made from permanently elastic, pure expanded graphite foils. This flexible and adaptable packing is especially suitable for applications with high pressure and high temperature services. As a standard packing Isartherm-Flex 6050 is suitable for almost every industrial sector, especially power plants and the chemical industry.
Isartherm-Flex KIN 6050/KIN Isartherm-Flex KIN 6050/KIN Flexible packing, reinforced with inconel wire, particularly for high preassure and high temperature service. Fulfills the requirements of refineries and power plant engineering.
Excellent cross-sectional density and volumetric stability. Wear resistant and gentle to the spindle. Low friction coefficent and good distribution of gland forces.
Joudol >SM< 8152 Joudol >SM< 8152 Joudol >SM< 8152 is a universally applicable graphite-based lubricant and anti-seize agent. This high-duty-lubricant is applicable in many different industry sectors and applications.
Kammprofile serrated gasket 9598 Kammprofile serrated gasket 9598 The Kammprofile serrated gasket 9598 has a concentrically machined serrated profile from a 4 mm thick base plate and a layer of pure graphite (purity 99.85 %) on both sides, each with 0.5 mm thickness (thicker layers on request). The gasket is easy to handle and particularly appropriate for flanges and flange-like connections in chemical and petrochemical industry, in power plants and nuclear power plants, etc.
KH Rubber-steel gasket 9107/KH KH Rubber-steel gasket 9107/KH KH Rubber-steel gasket 9107/KH is a gasket for load bearing connections. Metal support ring completely jacketed with rubber gives added strength while ensuring perfect sealing at lower bolt loads for large bore flanges. The metal core increases the stability of the gasket and results in better blow-out safety. Due to the spherical elastomer body the pre-compression can be reduced and still shows a better sealability.
KN Rubber-PVC gasket  9117/KN KN Rubber-PVC gasket 9117/KN KN Rubber-PVC gasket 9117/KN consists of a PVC supporting ring and a specially shaped, renewable, inner elastomer seal for installation in non-load-bearing positions in large bore pipework.
KN Rubber-Steel gasket 9107/KN KN Rubber-Steel gasket 9107/KN KN Rubber-Steel gasket 9107/KN consists of a replaceable EPDM-sealing lip, mounted on metal supporting ring which performs both a centering and a load-restricting function. It absorbs the tightening forces necessary for high pressures while protecting the rubber seal from excessive compression. This gasket guarantees a uniform distribution of stresses by special sealing lip geometry combined with highest quality elastomers.
Kombipack 6065 Kombipack 6065 Kombipack 6065 is a particular flexible combination of high quality carbon yarns and PTFE-yarns, diagonally braided with special PTFE compound and impregnated with running-in lubricant.
Manhole gasket  HP 6365/HP Manhole gasket
HP 6365/HP
A classic seal made of rubber with woven mesh. Temperature-, corrosion- and chemical resistant high duty mesh with elastomer coating. This material is especially designed to meet the high requirements of "TRD 401 -Test class D".
Packing Cartridge Unit 9984 Packing Cartridge Unit 9984 Packing cartridges combine quick and easy installation with robust simple construction to provide minimum downtime and maximum reliability in critical process applications. Cartridges can be used to compresate for large axail and radial movements. Depending on the application they can also be used for dry running. Selection of packing material depends in process media and operating conditions.
Packing cartridges are manufactured to invidual requirements but are regularly supplied to fit into DIN/ASME standard equipment e.g. agitators. The cartridge unit can be supplied with Live-loading and additional bellows containment as requierd for maximum environmental safety.
Packing extractor 9611 Packing extractor 9611 A robust, handy, special tool for packing removal from pumps, agitators, valves, etc. Proven by thousands of tools in use, it reduces the time to replace packings drastically. Prevents damage to shaft when used correctly while replacing the packing.
PTFE cord 9660 PTFE cord 9660 PTFE cord 9660 is a cord made from twisted pure PTFE with reduced-cold flow due to special production procedure, without additional impregnation or fillers.
PTFE sealant tape 6725/L PTFE sealant tape 6725/L PTFE sealant tape 6725/L is a concentrically woven pure PTFE filament yarn.
Pump packing cutter 9612 Pump packing cutter 9612 Easy to handle special tool for exact cutting of packing material. Makes cutting of exact length of packing rings with straight cut easy for pumps up to a shaft diameter of 110 mm.
Guarantees the correct length of packing to suit the shaft diameter. (special extension scale up to 250mm shaft diameter available).
No waste due to badly cut packings (too long or too short); quick and easy handling; ensures clean ends cut to the precise angle required.
Quick-Seal Blue 9655/BBC Quick-Seal Blue 9655/BBC Quick-Seal Blue 9655/BBC is a sealant tape of microcellular expanded PTFE, filled with hollow glass microspheres giving great material flexibility. With self adhesive strip on one side, the tape is easy and quick to install. Quick-Seal Blue 9655/BBC is an universal seal for reliable and economic sealing of plastic and fragile equipment flanges. This self-adhesive tape is very suitable to produce seals in any shape on-site.
Quick-Seal Brown 9655/RBC Quick-Seal Brown 9655/RBC Quick-Seal Brown 9655/RBC is a sealant tape of micro-cellular expanded PTFE, filled with quartz, with high residual thickness when installed. With a self adhesive strip on one side, the tape is easy and quick to install. Quick-Seal Brown 9655/RBC is a universal seal for reliable and economic sealing of ring-shaped or angled flanges e.g. pressure vessels or heat exchangers. The self-adhesive tape sold by the meter is very suitable to produce seals in any shape on-site. Preparations, delivery time and expensive waste (in case of punched gaskets) are not applicable.
Quick-Seal MB4 9654/MB4 Quick-Seal MB4 9654/MB4 Quick-Seal MB4 9654/MB4 is a sealant tape made of 100 % virgin, expanded PTFE manufactured by a special process giving the tape a multi-directional fibre structure with a self-adhesive strip on one side. Quick-Seal MB4 9654/MB4 is currently the first and only multidirectional ePTFE tape with approval and certification according to Germany's TRD 401 /VdTÜV-Merkblatt Dichtung 100 regulation and is especially adapted to the needs of inspection hole and man-hole connections.
Quick-Seal Multi 9654/MB Quick-Seal Multi 9654/MB Quick-Seal Multi 9654/MB is a sealant tape of 100% pure, virgin PTFE with self-adhesive on the rear face. The special manufacturing technique results in a multidirectional fibrillised structure (ePTFE), which demonstrates extraordinary properties.
Quick-Seal Universal F 9654/UF Quick-Seal Universal F 9654/UF Quick-Seal Universal F 9654/UF is a self adhesive sealant tape made from 100% (Teflon) ePTFE. The production process creates a microporous, mono-directional fiber structure (ePTFE), that gives the seal its special properties. The adhesive strip protected by a masking paper on the rectangular seal face makes fixing the sealing tape to the flange surface very easy and simple.
Quick-Seal White 9655/WBC Quick-Seal White 9655/WBC Quick-Seal White 9655/WBC is a sealant tape of micro-cellular expanded PTFE, without fillers for highest chemical resistance. With the self adhesive strip on one side, the tape is easy and quick to install. Quick-Seal White 9655/WBC is an universal seal for reliable and economic sealing of plastic flanges and equipment flanges. This self-adhesive tape is very suitable to produce seals in any shape on-site. Preparations, delivery time and expensive waste (in case of punched gaskets) are not applicable.
Rotatherm 0901/B Rotatherm 0901/B Rotatherm 0901/B rings are made from permanently elastic, expanded graphite (purity >99.85 %) without binders or fillers. Therefore this profile rings are almost maintenancefree, for severe temperature changes and /or extreme temperatures. The packing is a standard solution for all media in nearly all large and small boiler installations.
Rotatherm 0911/B Rotatherm 0911/B Rotatherm 0911/B rings are made from permanently elastic, expanded graphite (purity > 98 %) without binders or fillers. Therefore this profile rings are almost maintenancefree, for severe temperature changes and /or extreme temperatures. The packing is a standard solution for all media in boiler systems (process and small boiler installations).
Rotatherm S881/B Rotatherm S881/B Rotatherm S881/B reinforced rings are precision seals which have superior performance in severe applications. The rings are made from pure graphite (99.8 %) with internal, expanded stainless steel inserted reinforcement arranged to be non-contacting with metallic components. Rings can be supplied with metal caps for extrusion resistance particularly where there are high temperatures and pressures combined with large gaps.
Rotatherm Tape 0902 Rotatherm Tape 0902 Rotatherm Tape 0902 for sealing valve spindles during service. Quick and easy, packing rings with good performance can be produced directly within the valve. Non-hardening, long service life, easy installation. The tape is made of pure graphite (99.8 %). Also available in nuclear quality.
Soot blower set  1 Soot blower set 1 Soot blower set 1 is a combination of Isartherm 6011/A and Rotatherm die-pressed graphite rings for high temperature steam service. The EagleBurgmann soot blower set is manufactured to suit each individual application. Therefore this packing set solution provides a seal during the movement of the lance into the flue to contain gases and solid particles.
Soot blower set 2 Soot blower set 2 Soot blower set 2 is a combination of Araflon 6426 and Rotatherm die-pressed graphite rings for abrasive media. EagleBurgmann soot blower sets provide a seal during the movement of the lance into the flue to contain gases and solid particles. The soot blower set also supports the cleaning lance to reduce deflection (often a considerable load). The soot blower set also helps to strip off the surface solids on the lance after the operation in the cleaning cycle.
Spezial-Kombi K1 6430/K1 Spezial-Kombi K1 6430/K1 Spezial-Kombi K1 6430/K1 is a high quality combination of PTFE/graphite yarns diagonally braided with corners of aramid fiber to reduce gap extrusion. This is a special packing for applications at high pressure range and simultaneous oscillating movements as in plunger pumps.
Spezial-Kombi K2 6430/K2 Spezial-Kombi K2 6430/K2 Spezial-Kombi K2 6430/K2 is a high-grade combination of graphite incorporated PTFE, with reinforcement made of endless aramid fibers (Kevlar). This is a diagonally braided packing solution. Special packing for centrifugal pumps with high pressures and high sliding velocities.
Spiraltherm Graphite 9584 Spiraltherm Graphite 9584 Spiraltherm Graphite 9584 spiral wound gaskets are made of a V-shape profiled stainless steel tape with spiral wise winded graphite filler tapes. Both ends of the steel tape are spot-welded. These metallic gaskets are manufactured in several combinations of materials with a wide range of dimensions and geometry. Spiraltherm Graphite 9584 spiral wound gaskets are widely used in refineries, the chemical and petrochemical industry as well as in the power generation industry.
Spiraltherm Graphite 9594 Spiraltherm Graphite 9594 Spiraltherm Graphite 9594 spiral wound gaskets are made of a V-shape profiled stainless steel tape with spiral wise wound graphite filler tapes. Both ends of the steel tape are spot-welded. These metallic gaskets are manufactured in several combinations of materials with a wide range of dimensions and geometry. Spiraltherm Graphite 9594 spiral wound gaskets are widely used in refineries, the chemical and petrochemical industry as well as in the power generation industry.

Spiraltherm Graphite 9594/NFS Spiral wound gaskets f. e. for nuclear power stations can be supplied with compression curve calibration and documentation.
Spiraltherm Mica 9596 Spiraltherm Mica 9596 Spiraltherm Mica 9596 gaskets are manufactured in several combinations of materials with a wide range of dimensions and geometry. They are widely used in refineries, the chemical and petrochemical industry as well as in the power generation industry.
Spiraltherm PTFE 9595 Spiraltherm PTFE 9595 Spiraltherm PTFE 9595 gaskets are manufactured in several combinations of materials with a wide range of dimensions and geometry. They are widely used in refineries, the chemical and petrochemical industry as well as in the power generation industry.
Statotherm 1P 9593/1P Statotherm 1P 9593/1P Statotherm 1P 9593/1P is a graphite based gasket sheet made from flexible graphite (purity > 98 %) bonded to smooth stainless steel foil (316 L; 0.05 mm thickness). It is a gasket sheet material with a highly adaptive graphite layer allowing its use at low surface pressures or with weak flanges.
Statotherm  SSTC-TAL 9592/P Statotherm
SSTC-TAL 9592/P
Statotherm SSTC-TAL 9592/P is a high quality gasket sheet made of expanded graphite and a silicon free layer of expanded metal, without any binder or filler. The sealing material - expanded graphite (>99 % graduated density) with an acid-resistant expanded metal inlay of chromium nickel steel (1.4404) - forms a three dimensional structure when under load. This material is universally applicable in all sectors of industry and maintenance engineering.
Equates to Frenzelit Novaphit SSTC-TA-L.
Statotherm HDP 9593/HDP Statotherm HDP 9593/HDP Statotherm HDP 9593/HDP is a reinforced, multi-layer gasket sheet made of 0.5 mm thick layers of high grade, impregnated graphite foils (purity >99.85 %) manufactured without adhesive with 0.05 mm thick stainless steel foils (AISI 316 L). This gasket is an ideal solution for applications with high flange pressures and high operating pressures. The gasket is used for applications with a high demand for operating safety and leak tightness (60 N/mm²).
Equates to SGL Sigraflex Hochdruck.
Statotherm HDPPro 9593/HDPPro Statotherm HDPPro 9593/HDPPro Statotherm HDPPro 9593/HDPPro is a reinforced, multi-layer gasket sheet made of 0.5 mm thick layers of high grade, impregnated graphite foils (purity >99.8 %) manufactured without adhesive with stainless steel foils. For better handling reduction of leakage the gasket is impregnated.
Equates to SGL Sigraflex Hochdruck Pro.
Statotherm HT 9560 Statotherm HT 9560 Statotherm HT 9560 has the excellent characteristic of growing (in thickness) at the same amount as the flange material expansion rate i.e. the sealing material follows the deformation of the flange while retaining the necessary tightness with exceptional stability. The properties of Statotherm HT 9560 make it ideal for sealing burner flanges in combustion systems, high-temperature heat exchangers, gas turbine housings, flange joints of turbochargers and other exhaust gas superchargers.
Statotherm P foil 9591/P Statotherm P foil 9591/P Statotherm P foil 9591/P gasket sheet material consits of flexible graphite (purity >99.85 % with low ash content). The soft and flexible material can compensate uneven surfaces. It is a basic gasket material without measurable cold- or warm flow. Therefore Statotherm P foil 9591/P is applicable for all branches of industry as the gasket material for valves and pumps, for emergency service and special applications.
Equates to SGL Sigraflex foil.
Statotherm R profile rings R901/B.. Statotherm R profile rings R901/B.. Statotherm R profile rings R901/B are made from permanently elastic, expanded graphite (purity >99.85 %) without binders or fillers. Therefore these profile rings are almost maintenancefree, for severe temperature changes and /or extreme temperatures, which cannot be handled by elastomeric O-rings.
Statotherm S6P 9593/S6P Statotherm S6P 9593/S6P Statotherm S6P 9593/S6P is a gasket sheet made of flexible graphite (purity >98,0%), with stainless steel tanged metal reinforcement (316 L, 0.1 mm thickness). This gasket material shows its great properties especially in pipe flanges, hand holes, pump flanges, valves and ball valves in all branches of industry.
Statotherm SSTC 9592/MP Statotherm SSTC 9592/MP Statotherm SSTC 9592/MP is a reinforced gasket sheet made of impregnated graphite (purity >99 %) with adhesive-free inlay of expanded metal (1.4404, AISI 316 L).
Equates to Frenzelit Novaphit SSTC.
Statotherm Tape 6750 Statotherm Tape 6750 Statotherm Tape 6750 is a braided graphite tape made from pure grapite fibers. This braided tape can be used as a nearly endless sealing tape to seal all flange forms and styles.
Statotherm V Cover seal V881-… Statotherm V Cover seal V881-… Statotherm V Cover seals V881 are made from pure graphite (purity > 99%) with internal stainless steel inserts for seal spaces with larger gaps and/or higher pressures e.g. for power plants at high temperatures and up to approximately 1,000 mm diameter.
Statotherm V Cover seal V901/… Statotherm V Cover seal V901/… Statotherm V Cover seal V901 rings are high precision seals, which give a very good sealing result with excellent service life in combination with very little wear. The profile rings are made from permanently elastic, expanded graphite (purity >99%) without binders or fillers. Statotherm V Cover seals V901 are used as self-sealing gaskets in high-pressure valves e.g. for power plants at high temperatures and up to approx. 1,000 mm diameter.
Statotherm V-Flex 6850/V Statotherm V-Flex 6850/V Statotherm V-Flex 6850/V is a cover seal packing braided with a rectangular profile. The cover seal is made of permanently elastic pure graphite foils (purity > 96%) with Inconel® wire reinforcement to increase pressure resistance and doesn't contain binders. Statotherm V-Flex 6850/V is in general used as on-site maintenance self-sealing cover seal for high-pressure valves, e.g. for power plants at high temperatures and independent of diameter.
Supraflon 6435 Supraflon 6435 Supraflon 6435 is a diagonally braided packing of aramid staple fibre with universal silicon grease-free lubricant and PTFE impregnation. Its impregnation combined with excellent cross-sectional tightness offers a good sliding performance.
Thermoflon 6230 Thermoflon 6230 Thermoflon 6230 is a diagonal braided packing solution with high cross-sectional density of 100 % original GFO® (graphite-incorporated PTFE yarn).
Thermoflon SL 6230/SL Thermoflon SL 6230/SL Thermoflon SL 6230/SL is a diagonally braided packing made from graphite-incorporated PTFE yarn with additional lubricant. This packing solution is suitable for many industrial sectors, like e.g. oil and gas industry, petrochemical industry or chemical industry.
Thermoflon Spezial 6236/AK Thermoflon Spezial 6236/AK Thermoflon Spezial 6236/AK is a exclusively diagonal braided packing, made of PTFE/graphite-yarn with lubricant and reinforced corners with a very wear-resistant PTFE-fiber. This packing is braided in the special AK-profile. Therefore Thermoflon Spezial 6236/AK is a special packing for the pulp and paper industry!
Thermoflon TR 6232 Thermoflon TR 6232 Thermoflon TR 6232 is a high-purity, graphite-incorporated PTFE packing without any added lubricants and fillers. This packing solution is suitable as an anti-extrusion ring for preventing gap extrusion.
TR PTFE/graphite sealant tape 6732 TR PTFE/graphite sealant tape 6732 TR PTFE/graphite sealant tape 6732 is made of PTFE/graphited carbon yarn, without additional impregnation. This sealant tape consists of high quality carbon yarns.
Valve packing cutter 9616 Valve packing cutter 9616 Easy to handle special tool for exact cutting of packing material. Eases cutting of exact length of packing rings with slanted cuts for valves, mixers, kneaders up to a shaft diameter of 460 mm. Guarantees the correct length with respect to packing size.
No waste due to badly cut packing (too long or too short);
quick and easy handling; provides clean , precise angled, cut ends.